Right Angled Hose Tails 25mm I.D.

Description

A Hose tail is designed to connect a pipe between water butts to allow for an even greater volume of water to be stored. These can also be used to create an overflow system from your Water Butt using a suitable extension hose. This Hose Tail has an inside diameter (I.D.) of 25mm and outer diameter (O.D.) of 32mm, making it suitable for use with a water butt or tank, and includes a 3/4 inch BSP thread with washer and nut. Most water butts will be compatible for use with this Hose Tail as it can accommodate any water butt with a wall thickness of up to 4mm. Once it’s been properly secured you can add an extension hose (Harcostar Extension Hose 1.5m) to create either a link between two Water Butts or an Overflow pipe.